Használati útmutató Antari X-30 MK3

Antari effekt gép X-30 MK3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Antari X-30 MK3 (12 oldal) a effekt gép kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
READ ANDSAVE THESEINSTURCTIONS
2009 AntariLighting&EffectsLtd.
X-30WIRELESSCONTROL MODULE
USERMANUAL
BEDIENUNGSANLEITUNG
UserManual
AntariX-30WirelessControlModule
Congratulationsonthepurchaseofyournew
A X-30ntari WirelessControlModule
UserManual 01
Thank you for choosing the Antari X-30. The transmitter and the
receiving unit serve for wireless control of Antari X-310, X-510, X-515, and X-530
fog machines. The system operates with the fixed UHF frequency 433.920 MHz. The
transmission range is approx. 50 m and depends on the local conditions.
The system is designed for indoor use only. Never
remove the serial barcode from the devices as this would make the guarantee void.
wireless control module
REV3
The transmitter
operates with a 12 V battery type 23A.
-Introduction
This product is in accordance with the R&TTE directive (Radio and Telecommunication
Technical Equipment) of the European Union and falls into equipment Class 1. In all EU
member countries, the operation of this wireless system is generally approved by the
national telecom regulatory authority. The system is license-free. In some countries
outside the EU, the operation of this wireless system may needs to be approved by the
national telecoms regulatory authority.
-Approval
Keep this device dry.
For indoor use only. Not designed for outdoor use.
Ideal operating temperature is between 0° and 40° Celsius.
No user serviceable parts inside. Refer to your Antari dealer or other authorized service
personnel.
For adult use only.
Never use aggressive cleansing agents or chemicals for cleaning.
If the remote control is not used for a longer period, please remove the battery. Dispose of
used batteries properly to save the environment.
Damage, caused by manual modifications on the device are not subject to warranty. If the
device is used for other purposes than originally intended, or if it is not correctly operated
or not repaired, the product may suffer damages and the guarantee becomes void.
-SafetyInstructions
X-30
This wireless module consists of a transmitter equipped with two buttons for fog on and off
and a receiving unit with a 2-meter line, a 5-pin XLR connector and an LCD panel
displaying all operation statuses of the fog machine. The interface allows the operator to
customize fog machine functions by adjusting the fogging duration, interval, and volume
as well as the heater and the DMX and RF address. There are six buttons on the control
board. All current operating parameters are automatically stored in non-volatile memory,
allowing the machine to be powered down without losing function settings.
Screw the supplied antenna to the receiving unit. Connect the receiving unit to the
corresponding input jack on your fog machine. The jack has a latching. To remove the plug,
press the lever. Fix the receiving unit to the fog machine with the fixation screws. After
switching on, the display shortly indicates the fog machine starts with
the warm-up process and the display indicates Warming Up . While the unit is warming
up, fog output will not be possible yet. Program the necessary menu settings with the
control panel of the receiving unit. Once the warm up process is completed, fog output will
be possible. The display indicates Ready to Fog .
»Antari X-30«. Then
» «
-
» «
Use the button FUNCTION to enter the menu. Press the button FUNCTION so many times
until the desired menu item is shown in the display. Then press the button ENTER
[VOLUME] to enter the menu item. Use the buttons UP and DOWN to adjust values.
Confirm your settings with the button ENTER [VOLUME] or exit the menu item with the
button ESC [TIMER]. Never wait for more than 5 seconds to press the next button,
otherwise the setting procedure will be stopped.
-Configuration of the buttons
-Receivingunit
TRANSMITTER RECEIVINGUNIT
Blue(on)
Red(off)
ControlLED
Clip
Antenna
LCDscreen
Connectioncable
Functionbuttons
Fixationscrews
1.
Volume
Timer
DMX
Heater
RF Addr.
Interval
Volume
Duration
2.UP andDOWN
3. TIMER/ESC
4.VOLUME/ENTER
5.MANUAL/ON/OFF
TIMER
VOLUME
MANUAL
FUNCTION
VOLUME
ESC ENTER ON / OFF
TIMER MANUAL
-SetupandOperation
UserManual 02
X-30
DIP switches

Termékspecifikációk

Márka: Antari
Kategória: effekt gép
Modell: X-30 MK3

Szüksége van segítségre?

Ha segítségre van szüksége Antari X-30 MK3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók effekt gép Antari

Antari

Antari FT-70 Útmutató

5 December 2024
Antari

Antari F-7X Útmutató

4 Szeptember 2024
Antari

Antari S-120 Útmutató

25 Augusztus 2024
Antari

Antari MB-55 Útmutató

17 Augusztus 2024
Antari

Antari HZ-350 Útmutató

17 Augusztus 2024
Antari

Antari S-600 Útmutató

17 Augusztus 2024
Antari

Antari ICE-101 Útmutató

17 Augusztus 2024
Antari

Antari Z-1500 MK2 Útmutató

16 Augusztus 2024
Antari

Antari Z-9 Útmutató

14 Augusztus 2024
Antari

Antari DNG-250 Útmutató

14 Augusztus 2024

Útmutatók effekt gép

Legújabb útmutatók effekt gép

Blizzard Lighting

Blizzard Lighting Colorise Quadra Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting Hypno Spot Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting Blok 2 IP Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting Blok 1 IP Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting Stiletto I7 Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting PixelStorm 240 Útmutató

2 Április 2025
Blizzard Lighting

Blizzard Lighting HotBox Infiniwhite Útmutató

1 Április 2025
Blizzard Lighting

Blizzard Lighting RokBox EXA Útmutató

1 Április 2025
Midas

Midas Legend L1B Útmutató

1 Április 2025
Blizzard Lighting

Blizzard Lighting Verismo Fresnel WW Útmutató

27 Március 2025