Használati útmutató Alto Kick 12

Alto hangszóró Kick 12

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alto Kick 12 (20 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
USER GUIDE
ENGLISH
GUÍA DEL USUARIO
ESPAÑOL
GUIDE D’UTILISATION
FRANÇAIS
GUIDA PER L'USO
ITALIANO
BENUTZERHANDBUCH
DEUTSCH
GEBRUIKERSHANDLEIDING
NEDERLANDS
2
USER GUIDE (ENGLISH)
BOX CONTENTS
Kick12 amplifier; power cable; User Guide; Safety Instructions & Warranty Information Booklet
FEATURES
4-channel mixer with stereo line inputs on each channel and an XLR input on Channel 1
400 Watts of peak power, 200 Watts continuous
15” low-frequency transducer, 1” compression driver
Custom-tuned electronic crossover provides superb frequency response
True bi-amped design provides dedicated power to high and low drivers
Built-in Alesis digital effects processor with reverb, delay, chorus, and more
256 effect presets: 16 effects with 16 variations each
Integrated folding steel kickstand provides the ideal monitoring angle instantly
Level, effects, and high & low EQ controls on all four channels
Stereo RCA input for connecting MP3 players and other audio devices
Footswitch input allows instant activation or bypass of effects
1/4" headphone output with dedicated volume control
Angled speaker baffle for optimized throw
Dual XLR and 1/4" Mix outputs
Ground Lift switch
QUICK SETUP / CONNECTION DIAGRAM
Use the kickstand on the amplifier's rear panel to support the unit
at an ideal monitoring angle. See next page.
*Note: Any items not mentioned under Box Contents are not
included.
Microphone*
Power
Subwoofer*
Synthesizer*
Power
Power
Footswitch*
Loudspeaker* Loudspeaker*
3
KICKSTAND
Use the kickstand on the amplifier's
rear panel to support the unit at an
ideal monitoring angle.
TOP PANEL
10 11 1
423
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
8 9
1. POWER SWITCH Turns the amplifier on/off. Make sure the MAIN VOL and
HEADPHONES VOLUME knobs are set to "zero" before turning it on. The LED above this
switch illuminates when the amplifier is on.
2. HEADPHONES OUTPUT – Connect your 1/4" stereo headphones here.
3. HEADPHONES VOLUME Turn this knob to adjust the level of the HEADPHONE
OUTPUT.
4. MAIN VOL – Turn this knob to adjust the amplifier's main volume.
5. CHANNEL LEVEL Turn this knob to adjust the level of the corresponding channel.
6. CHANNEL HIGH EQ Turn this knob to adjust the level of the channel's high frequencies
(treble).
7. CHANNEL LOW EQ Turn this knob to adjust the level of the channel's low frequencies
(bass).
8. CHANNEL FX Turn this knob to adjust how much of the currently selected effect is
applied to the channel.
9. EFFECT PRESETS – Turn this knob to select an effect.
10. EFFECT VARIATIONS – Turn this knob to select different variations of the selected effect.
11. FX LEVEL Turn this knob to adjust how much of the currently selected effect is applied
to the entire mix.

Termékspecifikációk

Márka: Alto
Kategória: hangszóró
Modell: Kick 12

Szüksége van segítségre?

Ha segítségre van szüksége Alto Kick 12, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Alto

Alto

Alto PS 4L Útmutató

16 Január 2025
Alto

Alto MS8 Útmutató

16 Január 2025
Alto

Alto OEX900 Útmutató

16 Január 2025
Alto

Alto MS12SA Útmutató

16 Január 2025
Alto

Alto PS 5L Útmutató

16 Január 2025
Alto

Alto Micro 4 Útmutató

16 Január 2025
Alto

Alto MS8MA Útmutató

16 Január 2025

Útmutatók hangszóró

Legújabb útmutatók hangszóró