Használati útmutató AKAI APC40 MK2

AKAI hi-fi rendszer APC40 MK2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AKAI APC40 MK2 (28 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d'utilisation
Français ( 12 – 16 )
Guida per l'uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
2
User Guide (English)
Introduction
Box Contents
APC40 mkII USB Cable
Ableton Live Lite (download) User Guide
Software Download Card Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit akaipro.com/apc40-mkii.
For additional product support, visit akaipro.com/support.
Quick Start
1. Use the included USB cable to connect APC40 mkII's USB port to an available USB port
on your computer (powered on).
2. On your computer, open Ableton Live.
3. In Live, open the Preferences:
• Windows: Options > Preferences
• Mac OS X: Live > Preferences
4. Click the MIDI/Sync Tab.
5. Click an available Control Surface drop-down menu and select Akai APC40 mkII.
6. Click an available Input drop-down menu and select Akai APC40 mkII.
7. Click an available Output drop-down menu and select Akai APC40 mkII.
8. Close the Preferences window.
You can now use APC40 mkII with Live.
Basic Operation
Refer to this section to learn how to do basic tasks in Ableton Live using APC40 mkII.
Important: Before doing any of the following, set up APC40 mkII as a controller in Live
(described in the Quick Start section above).
To start or pause playback, press the Play button.
To start recording, press the Record button (to record normally) or the Session button (to
execute Live's Session Record feature).
To stop all clips, press the Stop All Clips button.
To launch a clip, press one of the Clip Launch buttons that corresponds to a clip in the
current 8x5 matrix. In Live, this is represented by a rectangle around the clips. The Clip
Launch buttons' colors will match the clips' colors as assigned in Live.
3
To stop a clip, press the Clip Stop button in the same track (column) as the clip you want to
stop.
To launch a scene, press one of the five Scene Launch buttons to the right of the 8x5 matrix
of Clip Launch buttons.
To move around the matrix of clips, use the Bank Select buttons to shift the viewable 8x5
matrix. In Live, this is represented by a rectangle around the clips. The Clip Launch buttons'
colors will match the clips' colors as assigned in Live.
To solo a track, press its Solo button.
To record-arm a track, press its Record-Arm button.
To mute or unmute a track, press its Track Activator (the button with the track's number
printed on it, above its Solo button).
To select a track, press its Track Selector (the button below the track's Clip Stop button).
To adjust volumes, use the Track Volume Faders.
To adjust panning, press the Pan button to put APC40 mkII's Assignable Knobs in Pan
Mode. The eight Assignable Knobs will control the panning positions of the current eight
tracks.
To adjust send levels, press the Sends button to put APC40 mkII's Assignable Knobs in
Sends Mode, allowing them to control the levels of Send A for the current eight tracks.
You can select a different send by pressing and holding Sends and then pressing a Track
Selector (Track Selector 1 will select Send A, Track Selector 2 will select Send B, etc.).
Note: Your return tracks will be shown in the matrix as the right-most tracks available in the
Live Set.
To use the Assignable Knobs to control other functions, press the User button to put
APC40 mkII's Assignable Knobs in User Mode. You can then assign them in Live's MIDI Map
Mode, allowing them (while in User Mode) to control whatever mappable parameters you
want.
To adjust devices:
1. Select a track by pressing the desired Track Selector.
2. If the Device View is not shown at the bottom of the window, press the Clip/Dev. View
until it is.
3. Use the Device Left/Right (
/ ) buttons to select the desired device.
4. Use the eight Device Control Knobs to control the parameters of the current device's
first bank. You can use the Bank Left/Right (
/ ) buttons to select the previous or next
bank in that device.
Tip: Alternatively, you can press the Device Lock button to lock or unlock APC40 mkII to or
from the currently selected device. When locked, you can use APC40 mkII's controls for that
device regardless of where the current focus is in your Live Set.

Termékspecifikációk

Márka: AKAI
Kategória: hi-fi rendszer
Modell: APC40 MK2

Szüksége van segítségre?

Ha segítségre van szüksége AKAI APC40 MK2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hi-fi rendszer AKAI

AKAI

AKAI EIE Pro Útmutató

13 Október 2024
AKAI

AKAI CDP-280 Útmutató

30 Szeptember 2024
AKAI

AKAI QX-4200 Útmutató

19 Szeptember 2024
AKAI

AKAI MINIAK Útmutató

13 Szeptember 2024
AKAI

AKAI AMP110 Útmutató

8 Szeptember 2024
AKAI

AKAI AMD05 Útmutató

8 Szeptember 2024
AKAI

AKAI AMD02 Útmutató

12 Augusztus 2024
AKAI

AKAI AMN250UC Útmutató

11 Augusztus 2024
AKAI

AKAI DR4vr Útmutató

7 Augusztus 2024
AKAI

AKAI QX-2100 Útmutató

6 Augusztus 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer

INKEE

INKEE Benbox Útmutató

1 Április 2025
JL Audio

JL Audio SlamPak SLPK-CAN-SPYDER1 Útmutató

31 Március 2025
Teradek

Teradek Bolt 10K Útmutató

29 Március 2025
Teradek

Teradek Bolt 500 Útmutató

29 Március 2025
Teradek

Teradek Cubelet 655 Útmutató

29 Március 2025
Teradek

Teradek Cube Series Útmutató

29 Március 2025
Teradek

Teradek Cube 725 Útmutató

29 Március 2025
Teradek

Teradek Slice 676 Útmutató

29 Március 2025
Teradek

Teradek Cube 705 Útmutató

29 Március 2025
Teradek

Teradek Cube 605 Útmutató

29 Március 2025