Használati útmutató Acer VT270

Acer Monitor VT270

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer VT270 (47 oldal) a Monitor kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/47
USER GUIDE
L CD Monitor VT0 ser s/VT270ie
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turno󰀨theLCDmonitorandunplugthepowercord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20°C to 60°C (-4°F to 140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turno󰀨yourcomputerandunplugyourcomputer'spowercord.
2. Connect the signal cable to VGA (Optional) and/or HDMI (Optional)
input socket of the monitor, and the VGA (Optional) and/or HDMI
(Optional) output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3. USB Type B Cable (Optional, USB Type B input models only)
Connect one end of the USB Type B cable (optional) to your
computer and connect the other end to your electric devices.
Connect the USB Type B (3.0) cable to port for fast charge (5V/1.5A).
Connect the USB Type B (3.0) cable to port.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
USB 3.0 (5V/1.5A)
AdaptiveSync (HDMI):
It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowere󰀩cient,virtuallystutterfreeandlow-latencydisplayupdate.
1
2
345

Termékspecifikációk

Márka: Acer
Kategória: Monitor
Modell: VT270

Szüksége van segítségre?

Ha segítségre van szüksége Acer VT270, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Acer

Acer

Acer EV227Q Útmutató

9 Április 2025
Acer

Acer VG281K Útmutató

16 Január 2025
Acer

Acer V223W Útmutató

16 Január 2025
Acer

Acer V193L Útmutató

13 Január 2025
Acer

Acer SB270 Útmutató

13 Január 2025
Acer

Acer AL2021 Útmutató

31 December 2025
Acer

Acer VVA241Y Útmutató

31 December 2025
Acer

Acer ED320QRP3 Útmutató

7 December 2024
Acer

Acer K252HQL Útmutató

5 December 2024

Útmutatók Monitor

Legújabb útmutatók Monitor