Használati útmutató Acer KA272E

Acer Monitor KA272E

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer KA272E (5 oldal) a Monitor kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
USER GUIDE
LCD Monitor KA2 series/KA242Y
English
Ac
Ac
Ac
Acer
er
er
er L
L
L
LCD Monitor
CD Monitor
CD Monitor
CD Monitor Quick
Quick
Quick
Quick Start Guide (QSG)
Start Guide (QSG)
Start Guide (QSG)
Start Guide (QSG)Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and/or DP
(optional) input socket of the monitor, and the HDMI (optional)
and/or DP (optional) output socket of the graphics card on the
computer. Then tighten the thumbscrews on the signal cable
connector.
3. Insert the monitor power cable into the power port at the
back of the monitor.
4. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical
content frame rates for power efficient, virtually stutter free and low-latency display update.

Termékspecifikációk

Márka: Acer
Kategória: Monitor
Modell: KA272E

Szüksége van segítségre?

Ha segítségre van szüksége Acer KA272E, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Acer

Acer

Acer EV227Q Útmutató

9 Április 2025
Acer

Acer VG281K Útmutató

16 Január 2025
Acer

Acer V223W Útmutató

16 Január 2025
Acer

Acer V193L Útmutató

13 Január 2025
Acer

Acer SB270 Útmutató

13 Január 2025
Acer

Acer AL2021 Útmutató

31 December 2025
Acer

Acer VVA241Y Útmutató

31 December 2025
Acer

Acer ED320QRP3 Útmutató

7 December 2024
Acer

Acer K252HQL Útmutató

5 December 2024

Útmutatók Monitor

Legújabb útmutatók Monitor