Használati útmutató Acer CastMaster Touch WPS2

Acer Beamer CastMaster Touch WPS2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer CastMaster Touch WPS2 (12 oldal) a Beamer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
Acer CastMaster Touch WPS2
Web Setting Manual
2
Introduction
Thanks for choosing Acer CastMaster Touch.
Acer CastMaster Touch allows users to instantly switch projector input, reducing
waiting time between multi-person rotation presentations at meetings, which
reduces meeting time and increases meeting efficiency.
Acer CastMaster Touch is available on a variety of platforms and supports Android
and iOS through additional external wireless A/V receivers (Miracast receiver,
Chromecast, and Apple TV). Through the HDMI or USB Type C (DP alt mode) output
of Windows and Mac system, its plug-and-project with direct cable connection.
Theres no need for driver installation and no additional training, significantly
improving the projector efficiency at enterprises, education, or conferences.
Configure your CastMaster Touch via the web page
CastMaster Touch users may configure the device via a web browser interface,
which enhances user experience. On CastMaster Touch's web management page,
customers may customize settings.
3
Start Configuring your CastMaster Touch
To access the web management page with CastMaster Touch, please follow the
following instructions, connecting your phone or laptop to CastMaster Touch.
CasterMaster supports 5GHz WiFi only. If the mobile device has 5GHz Wi-Fi wireless
connection, CastMaster Touch can also be found and connected through the WPS_XXX
SSID in the mobile device's wireless network menu.
1. Connect via computer
1.1 Connect CastMaster Touch to an external power supply.
1.2 Connect CastMaster Touch to an external display via HDMI port. Once the
steps above are completed, the standby screen below will appear on the
external display.
1.3 Users may see the required information for connection at the upper middle
of the standby screen: the SSID.
1.3.1 SSID: Select the correct SSID in the device's Wi-Fi list.
1.3.2 The default password is the same as the SSID name. Connect the
device to the CastMaster Touch.

Termékspecifikációk

Márka: Acer
Kategória: Beamer
Modell: CastMaster Touch WPS2

Szüksége van segítségre?

Ha segítségre van szüksége Acer CastMaster Touch WPS2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Beamer Acer

Acer

Acer X1329 Útmutató

15 Január 2025
Acer

Acer AX600 Útmutató

11 Január 2025
Acer

Acer Q59X Útmutató

11 Január 2025
Acer

Acer Q59S Útmutató

10 Január 2025
Acer

Acer KX321 Útmutató

9 Január 2025
Acer

Acer PD1520i Útmutató

31 December 2025
Acer

Acer X1263 Útmutató

31 December 2025
Acer

Acer SE210 Útmutató

5 December 2024
Acer

Acer P1276 Útmutató

5 December 2024

Útmutatók Beamer

Legújabb útmutatók Beamer