Használati útmutató Accucold FF6BBI7IFADA

Accucold hűtőszekrény FF6BBI7IFADA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Accucold FF6BBI7IFADA (1 oldal) a hűtőszekrény kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
DETAIL A
DETAIL B
A
BB
A1) Remove Door from Chassis by removing
Top and Bottom Hinges. Keep screws,
discard hinges.
2) Attach customer supplied handle to Door Panel
using countersunk screws.
3) Screw Door Panel to Frame.
4) Slide Frame over Refrigerator door and attach
with 1 screw on each side, center of door.
5) Screw Bottom Pc to Door.
6) Attach Top Brace to Frame with 1 screw on side.
Attach Bottom Brace in the same manner.
7) Drill a hole thru the Top and Bottom Frame using
the Braces as a guide with a 5/32" drill bit. Install
screws to finish attaching the Top and Bottom
Braces securely to the Frame.
8) Drill a hole into the Door Panel from the top and
bottom using the Braces as a guide with a 1/4"
drill bit. Do not exceed 5/8". This is the hole that
the door will pivot on.
9) Remount the door using the supplied Top and
Bottom Hinges.
Top Hinge
Bottom Brace
Frame
Bottom
Pc
Step 7
Step 8 Top Brace
Instructions for
Integrated Frame
Summit Appliance
1-718-893-3900
(Built-In Application)
Door Panel
Hinge
or

Termékspecifikációk

Márka: Accucold
Kategória: hűtőszekrény
Modell: FF6BBI7IFADA

Szüksége van segítségre?

Ha segítségre van szüksége Accucold FF6BBI7IFADA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hűtőszekrény Accucold

Útmutatók hűtőszekrény

Legújabb útmutatók hűtőszekrény